Trac Ticket Queries

In addition to reports, Trac provides support for custom ticket queries, which can be used to display tickets that meet specified criteria.

To configure and execute a custom query, switch to the View Tickets module from the navigation bar, and select the Custom Query link.


When you first go to the query page, the default filter will display tickets relevant to you:

  • If logged in then all open tickets, it will display open tickets assigned to you.
  • If not logged in but you have specified a name or email address in the preferences, then it will display all open tickets where your email (or name if email not defined) is in the CC list.
  • If not logged in and no name/email is defined in the preferences, then all open issues are displayed.

Current filters can be removed by clicking the button to the left with the minus sign on the label. New filters are added from the pulldown lists at the bottom corners of the filters box; 'And' conditions on the left, 'Or' conditions on the right. Filters with either a text box or a pulldown menu of options can be added multiple times to perform an Or on the criteria.

You can use the fields just below the filters box to group the results based on a field, or display the full description for each ticket.

After you have edited your filters, click the Update button to refresh your results.

Clicking on one of the query results will take you to that ticket. You can navigate through the results by clicking the Next Ticket or Previous Ticket links just below the main menu bar, or click the Back to Query link to return to the query page.

You can safely edit any of the tickets and continue to navigate through the results using the Next/Previous/Back to Query links after saving your results. When you return to the query any tickets which were edited will be displayed with italicized text. If one of the tickets was edited such that it no longer matches the query criteria , the text will also be greyed. Lastly, if a new ticket matching the query criteria has been created, it will be shown in bold.

The query results can be refreshed and cleared of these status indicators by clicking the Update button again.

Saving Queries

Trac allows you to save the query as a named query accessible from the reports module. To save a query ensure that you have Updated the view and then click the Save query button displayed beneath the results. You can also save references to queries in Wiki content, as described below.

Note: one way to easily build queries like the ones below, you can build and test the queries in the Custom report module and when ready - click Save query. This will build the query string for you. All you need to do is remove the extra line breaks.

Note: you must have the REPORT_CREATE permission in order to save queries to the list of default reports. The Save query button will only appear if you are logged in as a user that has been granted this permission. If your account does not have permission to create reports, you can still use the methods below to save a query.

You may want to save some queries so that you can come back to them later. You can do this by making a link to the query from any Wiki page.

[query:status=new|assigned|reopened&version=1.0 Active tickets against 1.0]

Which is displayed as:

Active tickets against 1.0

This uses a very simple query language to specify the criteria, see Query Language.

Alternatively, you can copy the query string of a query and paste that into the Wiki link, including the leading ? character:

[query:?status=new&status=assigned&status=reopened&group=owner Assigned tickets by owner]

Which is displayed as:

Assigned tickets by owner

Customizing the table format

You can also customize the columns displayed in the table format (format=table) by using col=<field>. You can specify multiple fields and what order they are displayed in by placing pipes (|) between the columns:


This is displayed as:

Full rows

In table format you can also have full rows by using rows=<field>:


This is displayed as:

Results (1 - 3 of 120)

1 2 3 4 5 6 7 8 9 10 11
Ticket Resolution Summary Owner Reporter
#133 fixed Following Ticket#113 human

Uninitialized values errors are resolved but still getting a new errors upon adding threshold values. Below errors are seen in log files and the MRTG PID gets killed. This occured in Centos 6.0 64 bit, mrtg-2.17.2, perl v5.10.1. Upon upgrading the version on mrtg to 2.17.4 didn't worked.

ERROR: 2012-07-10 09:40:58 -- Insecure dependency in system while running with -T switch at /usr/local/mrtg-2/bin/mrtg line 2121. 2012-07-10 09:40:58 -- * Restarting after 10 seconds in an attempt to recover from the error above.

No issue was seen on MRTG cfgs running in 32 bit OS(Centos 5.6, 6.0).

#130 worksforme No snmp response causes mrtg error human

In 2.17.4 if the server/device doesn't respond it triggers a MRTG error, no graphs is created.

Is this a bug or just a new way the latest version of MRTG hadle no responses?

SNMPv1_Session (remote host: "*" [*.*.*.*].161)

community: "*"

request ID: 58911489

PDU bufsize: 8000 bytes

timeout: 2s retries: 5 backoff: 1)

at C:/mrtg/bin\..\lib\mrtg2/ line 497

2012-03-02 07:20:07 -- SNMPGET Problem for ifInOctets.10 ifOutOctets.10 sysUptime sysName on *@*::::::v4only

at mrtg line 2330

2012-03-02 07:20:07 -- 2012-03-02 07:19:57: WARNING: skipping because at least the query for ifInOctets.10 on did not succeed 2012-03-02 07:20:07 -- 2012-03-02 07:19:57: WARNING: no data for ifInOctets&ifOutOctets:*@*. Skipping further queries for Host in this round. 2012-03-02 07:20:07 -- 2012-03-02 07:20:07: ERROR: Target[elendil_inet][_IN_] ' $target->[0]{$mode} ' did not eval into defined data 2012-03-02 07:20:07 -- 2012-03-02 07:20:07: ERROR: Target[elendil_inet][_OUT_] ' $target->[0]{$mode} ' did not eval into defined data 2012-03-02 07:24:56 -- Started mrtg with config 'elendil_mrtg.cfg' 2012-03-02 07:25:07 -- SNMP Error: no response received

#129 fixed Cfg ConversionCode broken (conversion code evaluation failed) human

At /usr/libXX/mrtg2/

Change ($SIG double quoted):

 my $code = "local $SIG{__DIE__};package MRTGConversion;\n". join( '', <CONV> ) . "1;\n";

to (single quoted):

        my $code = 'local $SIG{__DIE__}' . " ;package MRTGConversion;\n". join( '', <CONV> ) . "1;\n";
1 2 3 4 5 6 7 8 9 10 11

Query Language

query: TracLinks and the [[TicketQuery]] macro both use a mini “query language” for specifying query filters. Filters are separated by ampersands (&). Each filter consists of the ticket field name, an operator and one or more values. More than one value are separated by a pipe (|), meaning that the filter matches any of the values. To include a literal & or | in a value, escape the character with a backslash (\).

The available operators are:

= the field content exactly matches one of the values
~= the field content contains one or more of the values
^= the field content starts with one of the values
$= the field content ends with one of the values

All of these operators can also be negated:

!= the field content matches none of the values
!~= the field content does not contain any of the values
!^= the field content does not start with any of the values
!$= the field content does not end with any of the values

The date fields created and modified can be constrained by using the = operator and specifying a value containing two dates separated by two dots (..). Either end of the date range can be left empty, meaning that the corresponding end of the range is open. The date parser understands a few natural date specifications like "3 weeks ago", "last month" and "now", as well as Bugzilla-style date specifications like "1d", "2w", "3m" or "4y" for 1 day, 2 weeks, 3 months and 4 years, respectively. Spaces in date specifications can be omitted to avoid having to quote the query string.

created=2007-01-01..2008-01-01 query tickets created in 2007
created=lastmonth..thismonth query tickets created during the previous month
modified=1weekago.. query tickets that have been modified in the last week
modified=..30daysago query tickets that have been inactive for the last 30 days

See also: TracTickets, TracReports, TracGuide, TicketQuery

Last modified 5 years ago Last modified on Feb 21, 2018, 8:12:33 AM

NOTE: The content of this website is accessible with any browser. The graphical design though relies completely on CSS2 styles. If you see this text, this means that your browser does not support CSS2. Consider upgrading to a standard conformant browser like Mozilla Firefox or Opera but also Apple's Safari or KDE's Konqueror for example.